Small Floral Wave Border

About This Design

This border design stitches out at 774.2 × 197.5 mm (30.5 × 7.8 in) and uses 7 thread colors across 6 color changes. Total count is 17,420 stitches at a density of about 11.4 stitches/cm².

At The Machine

• Estimated stitch-out time: ~29 minutes at 600 spm
• Color changes: 6, automatic trims: 12
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 11.4 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 774.2 × 197.5 mm this needs a large-format hoop, or splitting across several hoopings with alignment marks — check it against your machine's maximum field first.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 472 Ultra Light Avocado
• 996 Medium Electric Blue
• 3777 Very Dark Terra Cotta
• 321 Red
• 741 Medium Tangerine
• 3013 Light Khaki Green
• 208 Very Dark Lavender

Stitching Notes

7 colors across 6 changes makes this a real thread-management job: lay the spools out in sequence order first and keep the color chart to hand. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A border repeats well along table runners, pillowcase edges, curtain hems and quilt sashing. Stitch one repeat on scrap and measure it, then work out how many repeats your piece needs before you hoop the real fabric.