Sailors with Flags
Sailors with Flags is a free machine embroidery design digitized at 95.2 × 44.4 mm with 2,391 stitches in 5 thread colors. Expect roughly 4 minutes of stitch-out time on a home machine. Download it below in PES format, ready to transfer to your machine.
Download Files
Free for personal stitching. Need another format (DST, JEF, EXP…)? More formats are on the way. Design License →
Stitching Color Sequence
Thread order as programmed in the file — follow along at your machine.
| # | Thread | Stitches |
|---|---|---|
| 1 | 42 · Flesh Pink | 199 |
| 2 | 2 · Blue | 1,319 |
| 3 | 5 · Red | 231 |
| 4 | 29 · White | 444 |
| 5 | 26 · Light Brown | 146 |
About This Design
This sailors doing semaphore design stitches out at 95.2 × 44.4 mm (3.7 × 1.7 in) and uses 5 thread colors across 4 color changes. Total count is 2,391 stitches at a density of about 56.6 stitches/cm².
At The Machine
- Estimated stitch-out time: ~4 minutes at 600 spm
- Color changes: 4, automatic trims: 21
- Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.
Fabric & Hooping
At about 56.6 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 95.2 × 44.4 mm reach for a 5×7 in hoop.
Thread Colors in This Design
The file carries 5 thread colors — these are the DMC references programmed into it:
- 42 Flesh Pink
- 2 Blue
- 5 Red
- 29 White
- 26 Light Brown
Stitching Notes
With 5 colors and 4 changes you can pre-wind the whole set before you start and never leave the machine. Being a PES file, the thread assignments come embedded, so most machines will display the color list for you.
What to Make With It
A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.