Rose and Bud Lace Applique
Rose and Bud Lace Applique is a free machine embroidery design digitized at 77.5 × 95.9 mm with 3,075 stitches in 1 thread colors. Expect roughly 5 minutes of stitch-out time on a home machine. Download it below in PES format, ready to transfer to your machine.
Pattern Details
- Craft
- Machine Embroidery
- Colors
- 1
- Stitches
- 3,075
- Design Size
- 77.5 × 95.9 mm
- Recommended Hoop
- 4" × 4" (100 × 100 mm)
- Est. Stitch-Out Time
- ~5 min
- Color Changes
- 0
- Trims
- 0
- Difficulty
- Beginner
Download Files
Free for personal stitching. Need another format (DST, JEF, EXP…)? More formats are on the way. Design License →
Stitching Color Sequence
Thread order as programmed in the file — follow along at your machine.
| # | Thread | Stitches |
|---|---|---|
| 1 | 3,073 |
About This Design
This rose and bud lace applique design stitches out at 77.5 × 95.9 mm (3.1 × 3.8 in) and uses 1 thread color across no color changes. Total count is 3,075 stitches at a density of about 41.4 stitches/cm².
At The Machine
- Estimated stitch-out time: ~5 minutes at 600 spm
- Color changes: 0
- Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.
Fabric & Hooping
At about 41.4 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 77.5 × 95.9 mm reach for a 5×7 in hoop.
Stitching Notes
This is a single-color design, so it runs start to finish without a stop — handy for chain-stitching several pieces in one sitting. Being a PES file, the thread assignments come embedded, so most machines will display the color list for you.
What to Make With It
A border repeats well along table runners, pillowcase edges, curtain hems and quilt sashing. Stitch one repeat on scrap and measure it, then work out how many repeats your piece needs before you hoop the real fabric.
