Purple Ribbon Bow Ornament
Purple Ribbon Bow Ornament is a free machine embroidery design digitized at 85.1 × 85.0 mm with 2,928 stitches in 1 thread colors. Expect roughly 5 minutes of stitch-out time on a home machine. Download it below in PES format, ready to transfer to your machine.
Download Files
Free for personal stitching. Need another format (DST, JEF, EXP…)? More formats are on the way. Design License →
Stitching Color Sequence
Thread order as programmed in the file — follow along at your machine.
| # | Thread | Stitches |
|---|---|---|
| 1 | 086 · 25 | 2,926 |
About This Design
This decorative ribbon design stitches out at 85.1 × 85.0 mm (3.4 × 3.3 in) and uses 1 thread color across no color changes. Total count is 2,928 stitches at a density of about 40.5 stitches/cm².
At The Machine
- Estimated stitch-out time: ~5 minutes at 600 spm
- Color changes: 0
- Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.
Fabric & Hooping
At about 40.5 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 85.1 × 85.0 mm a 4×4 in hoop is plenty.
Thread Colors in This Design
The file carries 1 thread color — these are the DMC references programmed into it:
- 086 25
Stitching Notes
This is a single-color design, so it runs start to finish without a stop — handy for chain-stitching several pieces in one sitting. Being a PES file, the thread assignments come embedded, so most machines will display the color list for you.
What to Make With It
A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.