Pink Palm Tree with Lattice Trunk

About This Design

This palm tree design stitches out at 77.7 × 77.8 mm (3.1 × 3.1 in) and uses 5 thread colors across 4 color changes. Total count is 10,644 stitches at a density of about 176.1 stitches/cm².

At The Machine

• Estimated stitch-out time: ~18 minutes at 600 spm
• Color changes: 4, automatic trims: 5
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 176.1 stitches/cm² this is a dense fill that pulls hard on the fabric. Back it with firm cut-away, add a water-soluble topping on towelling or fleece, and pick a stable woven over anything stretchy. At 77.7 × 77.8 mm a 4×4 in hoop is plenty.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 931 Medium Antique Blue
• 738 Very Light Tan
• 899 Medium Rose
• 472 Ultra Light Avocado
• 996 Medium Electric Blue

Stitching Notes

With 5 colors and 4 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

Motifs like this scatter well — single placements on pockets and yokes, or repeated across a quilt block, a set of napkins or a child's blanket. It reads the same at any orientation, so placement is forgiving.