Phoenix

About This Design

This phoenix design stitches out at 250.6 × 189.5 mm (9.9 × 7.5 in) and uses 11 thread colors across 10 color changes. Total count is 28,229 stitches at a density of about 59.4 stitches/cm².

At The Machine

• Estimated stitch-out time: ~47 minutes at 600 spm
• Color changes: 10, automatic trims: 1
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 59.4 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 250.6 × 189.5 mm plan on 6×10 in or larger, and mark your centre lines before hooping.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 415 Pearl Gray
• 780 Ultra Very Dark Topaz
• 208 Very Dark Lavender
• 798 Dark Delft Blue
• 3013 Light Khaki Green
• 704 Bright Chartreuse
• 741 Medium Tangerine
• 776 Medium Pink
• 321 Red
• 645 Very Dark Beaver Gray
• 3777 Very Dark Terra Cotta

Stitching Notes

11 colors across 10 changes makes this a real thread-management job: lay the spools out in sequence order first and keep the color chart to hand. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.