Corner Flourish
Corner Flourish is a free machine embroidery design digitized at 63.1 × 71.6 mm with 2,108 stitches in 1 thread colors. Expect roughly 4 minutes of stitch-out time on a home machine. Download it below in PES format, ready to transfer to your machine.
Pattern Details
- Craft
- Machine Embroidery
- Colors
- 1
- Stitches
- 2,108
- Design Size
- 63.1 × 71.6 mm
- Recommended Hoop
- 4" × 4" (100 × 100 mm)
- Est. Stitch-Out Time
- ~4 min
- Color Changes
- 0
- Trims
- 0
- Difficulty
- Beginner
Download Files
Free for personal stitching. Need another format (DST, JEF, EXP…)? More formats are on the way. Design License →
Stitching Color Sequence
Thread order as programmed in the file — follow along at your machine.
| # | Thread | Stitches |
|---|---|---|
| 1 | 15 · Brass | 2,106 |
About This Design
This gold corner flourish design stitches out at 63.1 × 71.6 mm (2.5 × 2.8 in) and uses 1 thread color across no color changes. Total count is 2,108 stitches at a density of about 46.7 stitches/cm².
At The Machine
- Estimated stitch-out time: ~4 minutes at 600 spm
- Color changes: 0
- Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.
Fabric & Hooping
At about 46.7 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 63.1 × 71.6 mm a 4×4 in hoop is plenty.
Thread Colors in This Design
The file carries 1 thread color — these are the DMC references programmed into it:
- 15 Brass
Stitching Notes
This is a single-color design, so it runs start to finish without a stop — handy for chain-stitching several pieces in one sitting. Being a PES file, the thread assignments come embedded, so most machines will display the color list for you.
What to Make With It
Motifs like this scatter well — single placements on pockets and yokes, or repeated across a quilt block, a set of napkins or a child's blanket. It reads the same at any orientation, so placement is forgiving.
