Christmas Tree with String Lights

About This Design

This christmas tree design stitches out at 81.9 × 85.1 mm (3.2 × 3.4 in) and uses 5 thread colors across 4 color changes. Total count is 6,754 stitches at a density of about 96.9 stitches/cm².

At The Machine

• Estimated stitch-out time: ~11 minutes at 600 spm
• Color changes: 4, automatic trims: 15
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 96.9 stitches/cm² the fill is moderate: one layer of medium-weight cut-away handles most wovens, while knits want a second layer or a fusible backing. At 81.9 × 85.1 mm a 4×4 in hoop is plenty.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 3013 Light Khaki Green
• 798 Dark Delft Blue
• 208 Very Dark Lavender
• 780 Ultra Very Dark Topaz
• 415 Pearl Gray

Stitching Notes

With 5 colors and 4 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

Motifs like this scatter well — single placements on pockets and yokes, or repeated across a quilt block, a set of napkins or a child's blanket. It reads the same at any orientation, so placement is forgiving.